Oki C831dn - Page 26

- 26 -
Preparing Your Printer
1
1. Setup
12 Press the scroll button several times
to select [System] and press the
<ENTER> button.
䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑䎃䎃䎃䎔䎒䎔
䎶䏘䏓䏓䏏䏌䏈䏖䎃䎯䏌䏉䏈
䎱䏈䏗䏚䏒䏕䏎
䎶䏜䏖䏗䏈䏐
䎷䏕䏄䏜䎃䎦䏒䏘䏑䏗
13 Press the scroll button several times
to select [Total Memory] and press the
<ENTER> button.
䎶䏜䏖䏗䏈䏐䎃䎃䎃䎃䎃䎃䎃䎕䎒䎕
䎩䏏䏄䏖䏋䎃䎰䏈䏐䏒䏕䏜
䎶䎧䎃䎦䏄䏕䏇
䎷䏒䏗䏄䏏䎃䎰䏈䏐䏒䏕䏜
14 Check that the value of
[Total Memory ] has increased.
䎷䏒䏗䏄䏏䎃 䎰䏈䏐䏒䏕䏜 䫹䎃䎔䎒䎔
䎚䎙䎛䎰䎥
- For memory expanded to 256 MB, it is
[512 MB]; for memory expanded to 512
MB, it is [768 MB].
Note
● If the value of [Total Memory] has not increased, turn
off your printer and unplug the AC cord and Ethernet or
USB cable, and then reinstall the additional RAM.
15 Press the <ON LINE> button.
Installing the 16-GB SD Memory
Card Kit
For storing print data or a secure printing, install
the SD memory card kit.
SD memory socket
SD memory card
Memo
● The SD memory socket is attached to the SD memory
card.
Note
● Use only genuine Oki Data products. The performance
cannot be guaranteed when using other products.
● You can not use the SD memory card with the protection
switch for accidental overwriting locked. Make sure to
release the lock.
1 Turn off your printer, and then unplug
the AC cord and Ethernet or USB cable.
Reference
● “Turning Off the Power” P.22
2 Open the access cover (1).
1
3 Touch metallic parts of the printer to
discharge static electricity.