Oki C831dn - Page 28

- 28 -
Preparing Your Printer
1
1. Setup
11 Press the <ENTER> button on the
operator panel.
12 Check that [Conguration] is selected
and press the <ENTER> button.
䎩䏘䏑䏆䏗䏌䏒䏑䏖 䎃䎃䎃䎃䎃䎃䎔䎒䎕
䎳䏕䏌䏑䏗䎃䎬䏑䏉䏒䏕䏐䏄䏗䏌䏒䏑
䎳䏕䏌䏑䏗䎃䎶䏈䏆䏘䏕䏈䎃䎭䏒䏅
䎰䏈䏑䏘䏖
䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑
13 Press the scroll button several times
to select [System] and press the
<ENTER> button.
䎦䏒䏑䏉䏌䏊䏘䏕䏄䏗䏌䏒䏑䎃䎃䎃䎔䎒䎔
䎶䏘䏓䏓䏏䏌䏈䏖䎃䎯䏌䏉䏈
䎱䏈䏗䏚䏒䏕䏎
䎶䏜䏖䏗䏈䏐
䎷䏕䏄䏜䎃䎦䏒䏘䏑䏗
14 Press the scroll button several times
to select [SD Card] and press the
<ENTER> button.
䎶䏜䏖䏗䏈䏐 䎃䎃䎃 䎃䎃䎃䎕䎒䎕
䎩䏏䏄䏖䏋䎃䎰䏈䏐䏒䏕䏜
䎶䎧䎃䎦䏄䏕䏇
䎷䏒䏗䏄䏏䎃䎰䏈䏐䏒䏕䏜
15 Check that the value of [SD Card ] is
[16 GB].
䎶䎧䎃䎦䏄䏕䏇 䫹 䫹䫹䎃 䎔䎒䎔
䎔䎘䎪䎥䎾䎩䎘䎕䏀
Note
● [15 GB] may be displayed in [SD Card]. This is not an
error.
● If the value of [SD Card] has not increased, turn off
your printer and unplug the AC cord and Ethernet or USB
cable, and then reinstall the SD memory card.
16 Press the <ON LINE> button.