Oki C831dn - Page 38

- 38 -
Connecting to a Computer
1
1. Setup
8 Click [AppleTalk].
9 Select the name of your printer and then
check that [OKI C831(PS)] is displayed
in [Print Using].
10 Click [Add].
11 Check that your printer is displayed
in [Printers] and [OKI C831(PS)] is
displayed in [Kind].
Note
● If [OKI C831(PS)] is not correctly displayed in
[Kind], click [-] to remove your printer from [Print
& Fax] and then redo the procedure from steps 7 to
10.
12 Close [Print & Fax].
13 Remove “Software DVD-ROM” from the
computer.
 Next, enable the sleep mode on the
printer.
Note
● If using the EtherTalk, disable the sleep mode.
1 Press the <ENTER> button on the
operator panel.
2 Press the scroll button several times
to select [Admin Setup], and then
press the <ENTER> button.
䎩䏘䏑䏆䏗䏌䏒䏑䏖䎃䎃䎃䎃䎃䎃䎕䎒䎕
䫹 䎦䏄䏏䏌䏅䏕䏄䏗䏌䏒䏑
䎤䏇䏐䏌䏑䎃䎶䏈䏗䏘䏓
3 Enter the administrator password, using
the numeric (0-9) keys.
The factory default password is “aaaaaa”. Press
the <ENTER> button after each character you
input.
䎨䏑䏗䏈䏕䎃䎳䏄䏖䏖䏚䏒䏕䏇
䯴䎙䎐䎔䎕䏇䏌䏊䏌䏗䏖䎌
4 Press the <ENTER> button.