Oki C831dn - Page 65

- 65 -
How to Print from the MP Tray
2
2. Printing Basic Operation
11 Press the <BACK> button until
[MPTray Cong] is displayed.
䎰䎳䎷䏕䏄䏜䎃 䎦䏒䏑䏉䏌䏊 䎃䎃䎃䎔䎒䎔
䎳䏄䏓䏈䏕䎃 䎶䏌䏝䏈
䎰䏈䏇䏌䏄䎃 䎷䏜䏓䏈
䎰䏈䏇䏌䏄 䎃䎺䏈䏌䏊䏋䏗
䎷䏕䏄䏜䎃 䎸䏖䏄䏊䏈
12 Press the scroll button to select
[Media Type] and then press the
<ENTER> button.
䎰䎳 䎷䏕䏄䏜䎃 䎦䏒䏑䏉䏌䏊 䫹䎃䎔䎒䎔
䎳䏄䏓䏈䏕䎃䎶䏌䏝䏈
䎰䏈䏇䏌䏄䎃䎷䏜䏓䏈
䎰䏈䏇䏌䏄 䎃 䎃 䎺䏈䏌䏊䏋䏗
䎷䏕䏄䏜䎃䎸䏖䏄䏊䏈
13 Press the scroll button to select the
type of the loaded paper and then press
the <ENTER> button.
䫹䫹䫹䫹䫹䎰䏈䏇䏌䏄 䎃 䎷䏜䏓䏈 䎃 䎃 䎃 䎃䎃 䎔䎒䎖
䎍䎃䎳䏏䏄䏌䏑
䎯䏈䏗䏗䏈䏕䏋䏈䏄䏇
䎯䏄䏅䏈䏏䏖
䎷䏕䏄䏑䏖䏓䏄䏕䏈䏑䏆䏜
14 Press the <BACK> button until
[MPTray Cong] is displayed.
䎰䎳 䎷䏕䏄䏜䎃 䎦䏒䏑䏉䏌䏊 䫹䎃䎔䎒䎔
䎳䏄䏓䏈䏕䎃䎶䏌䏝䏈
䎰䏈䏇䏌䏄䎃䎷䏜䏓䏈
䎰䏈䏇䏌䏄 䎃 䎃 䎺䏈䏌䏊䏋䏗
䎷䏕䏄䏜䎃䎸䏖䏄䏊䏈
15 Press the scroll button to select
[Media Weight] and then press the
<ENTER> button.
䎰䎳䎷䏕䏄䏜䎃 䎦䏒䏑䏉䏌䏊 䫹䎃䎔䎒䎔
䎳䏄䏓䏈䏕䎃䎶䏌䏝䏈
䎰䏈䏇䏌䏄䎃䎷䏜䏓䏈
䎰䏈䏇䏌䏄䎃䎺䏈䏌䏊䏋䏗
䎷䏕䏄䏜䎃䎸䏖䏄䏊䏈
16 Press the scroll button to select the
weight of the loaded paper and then
press the <ENTER> button.
䎰䏈䏇䏌䏄䎃䎺䏈䏌䏊䏋䏗 䫹䎃䎔䎒䎕
䎍䎃䎯䏌䏊䏋䏗
䎰䏈䏇䏌䏘䏐䎃䎯䏌䏊䏋䏗
䎫䏈䏄䏙䏜
䎰䏈䏇䏌䏘䏐
17 Press the <ON LINE> button to exit the
menu mode.
18 Open the le you want to print, and print
it by following the procedures below.
For Windows PCL Printer Driver
1 From the [File] menu, select [Print].
2 Click [Preferences] or [Properties].
3 On the [Setup] tab, select a paper size
from [Size].
4 Select [Multipurpose Tray] from
[Source].
5 Start printing.
For Windows XPS Printer Driver
1 From the [File] menu, select [Print].
2 Click [Preferences] or [Properties].
3 On the [Setup] tab, select a paper size
from [Size].
4 Select [Multipurpose Tray] from
[Source].
5 Start printing.