Oki C831dn User Manual

- 93 -
Windows Utilities
4
4. Using Utility Software
Operator Panel Language
Setup
You can change the operator panel display
language.
Note
● This program uses the print driver. Please install the
printer driver on the computer beforehand.
Starting Up
1 Turn on the printer.
2 Plug in the computer, and insert the
Software DVD-ROM.
3 Click [Run Setup.exe].
If the [User Account Control] dialog box
appears, click [Yes].
4 Select the model and click [Next].
5 Read the user license agreement and
click [I Agree].
6 Read the recommendation on the
environment and click [Next].
7 Select [Device Conguration].
8 Click [Operator Panel Language
Setup].
9 Click on [Next].
10 Select the printer and click [Next].
11 Select the model name of the printer
and click on [Next].
12 Select the language and click on [Next].
13 Click on [Print Test Page] and click on
[Next].
14 Check whether the menu language
format value printed in step 12 is in the
value range displayed on the screen.
15 Click on [Next].
16 Check the content to be set and, click on
[Setup].
17 Click [Finish].
18 Check that the language you want is
displayed is on the screen of the printer.
19 Restart the printer.
Note
● If the language selection screen is not selected, carry
out the following procedure.
a Click on [Start] and select [Search
for Programs and Files].
b Enter “D:/Utilities/PanelDwn/
oppnlngs.exe” and press the
<Enter> key.
(This example uses the DVD-ROM
drive (D:))
c Go to step 8.

Oki C831dn Specifications

General

Brand	Oki
Model	C831dn
Category	Printer
Language	English