- 146 -
7. Maintenance
6
Open the separation roller cover (6) forward while pressing the center part of
the MP tray.
7
Wipe the separation rollers (7) with a wet cloth that has been wrung out well.
8
Close the separation roller cover (6).
9
Lower the paper set cover (5).
10
While pressing the right arm (3) on the MP tray (2) inward, slightly lift the MP
tray (2) and hook the tab (4).
• Closing the MP tray without putting the tab back in place may crack the paper set cover. Be sure to put it back
in place.
11
In the same manner, while pressing the left arm on the MP tray inward, slightly
lift the MP tray and hook the tab.
• Closing the MP tray without putting the tab back in place may crack the paper set cover. Be sure to put it back
in place.
To Next Page
Loading...
Need help?
General
