Network configuration > 17
EtherTalk Tab
This allows you to configure
EtherTalk related items.
RPRINTER
Setup
Available if you select
RPRINTER mode in
Operation Mode.
By selecting the RPRINTER
button, this is displayed:
Here you can specify print
servers to which the printer
can be connected.
Time Out Set duration from the last data’s
arrival to freeing of the port in
seconds.
Printer Name Set the NetWare printer object name.
ITEM EXPLANATION
ITEM EXPLANATION
Use EtherTalk
Protocol
Set EtherTalk protocol to enabled/disabled.
Printer Name Set EtherTalk Printer object name.
Zone Name Set the zone name to which the printer belongs.