C9600 Utilities Guide
Storage Device Manager • 167
Forms
PCL
Step 1: Create the Forms in Your Software Application
1. Create the document in your software application.
2. Click File → Print and make sure the OKI PCL driver is
selected.
3. Print the document to a file using the extension PRN.
Step 2: Create a New Project
1. Open Storage Device Manager.
2. Click Projects → New Project.
The Project dialog box opens.
3. Click Projects → Save Project. Enter the path/name for
storing the project on your hard drive or your network. Click Save.
Important!
Remember that file names and paths are case sensitive.
To Next Page
Loading...
Need help?
General
