C9600 Utilities Guide
Storage Device Manager • 194
Overlays
Windows PCL
Downloading the print file to use as an overlay
Once you have created a print (PRN) file on your PC's hard disk, you
must download this file to the printer.
Use the Storage Device Manager to download the PRN file.
The Storage Device Manager software is included with the original
software CDs that were supplied with your printer.
1. Launch Storage Device Manager.
2. Allow the program to discover (locate) the printer.
3. Click Project. Click New Project.
4. From the Project menu, select Add File to Project.
5. Select the PRN file(s) that you created earlier.
PCL: This automatically generates a BIN file.
PostScript: This automatically generates a PostScript hst file.
Important!
The BIN file is automatically assigned an ID number.
To change the ID number
• double-click the number
• enter a new one in the ID field.
To Next Page
Loading...
Need help?
General
