OkiLAN 8200e Network User’s Guide
164
Windows NT 4.0
1. Click [Start] → [Settings] → [Control Panel].
2. Double-click the [Network] icon.
3. In the” Network” window, click the [Protocols] tab.
4. If the [TCP/IP Protocol] is not listed, click [Add].
5. In the "Select Network Protocol" window, click [TCP/IP
Protocol] → [OK].
6. Follow the on-screen instructions to finish the installation.
Windows Me/98
1. Click the [Start] → [Settings] → [Control Panel].
2. Double-click the [Network] icon.
3. In the “Network” window, click [Configuration Panel].
4. If the [Client for Microsoft Networks] is not listed, click [Add].
5. In the "Select Network Component Type" window, click
[Protocol] → [Add].
6. In the "Select Network Protocol" window, click [Microsoft] from the
list of manufacturers, then click [TCP/IP] from the list of network
protocols.
7. Click [OK].
8. Follow the on-screen instructions to finish the installation.
NOTE
The Windows NT 4.0 installation CD-ROM may be
required to complete the installation.
NOTE
The Windows installation CD-ROM may be required to
complete the installation.
To Next Page
Loading...
Need help?
General
