OkiLAN 8200e Network User’s Guide
74
SNMP
SNMP-1
Community name used to check incoming SNMP requests. Displayed
as asterisks (***) for security reasons. Up to 15 alphanumeric
characters.
Default setting: Public
AdminManager
[Setup]
→ [OKI Device Setup] → [SNMP] → [Authentic
Community]
Web Browser
Not available
TELNET
[Setup SNMP]
→ [Authentic Community]
SNMP-2
Community name assigned to outgoing system traps such as cold
start, authentication failure, etc. Up to 15 alphanumeric characters.
Default setting: Public
AdminManager
[Setup]
→ [OKI Device Setup] → [SNMP] → [TRAP
Community]
Web Browser
[Network]
→ [SNMP Trap] → [STEP1] → [Printer Trap
Community Name]
TELNET
[Setup SNMP]
→ [Trap Community]