OkiLAN 8200e Network User’s Guide
231
Example: Enabling FTP
1. Ensure that the LCD Display panel indicates that the printer is ready
to print.
2. Press the Enter button to switch to the Menu mode.
3. With [Configuration] highlighted, press the Enter button to select this
menu.
4. Press the Up-arrow or Down-arrow [
▲ or ▼ ] buttons repeatedly
until [Admin Setup] is highlighted.
5. Press the Enter button to select this item.
6. Press the Up-arrow or Down-arrow [
▲ or ▼ ] buttons to enter the
first digit of the password, then press the Enter button.
7. Repeat the previous step for each digit of the password.
8. Press the Enter button to go into the [Admin Setup] menu.
9. With [Network Setup] highlighted, press the Enter button.
10. With [Slot1:100/10 Base] highlighted, press the Enter button.
11. Press the Up-arrow or Down-arrow [
▲ or ▼ ] buttons repeatedly
until [FTP] is highlighted.
12. Use the Up-arrow or Down-arrow [
▲ or ▼ ] buttons to highlight
[Enable].
13. Press the Enter button to engage the setting.
An Asterisk (*) appears next to the new setting.
14. Press the Online button to exit menu mode and return to the Ready
to print status.
To Next Page
Loading...
Need help?
General
