OkiLAN 8200e Network User’s Guide
52
䊳 Setup by HTTP
Launches the default browser in your environment to access the
selected printer’s web page.
䊳 Setup by TELNET
Launches the TELNET application in your environment to access the
selected printer’s TELNET port.
䊳 Create NetWare Queues
Use this to create a NetWare queue on the NetWare server from
AdminManager.
– NetWare Client 32 or IntranetWare Client should be loaded on the
PC on which the AdminManager runs. Also the client package
should be configured to access NetWare NDS network or bindery
network.
– You should login to NetWare servers as a user who can create
objects on the servers. If you want to create a queue with the
remote printer mode on NetWare 4.1, you should select NDS
mode. You cannot create a queue if Bindery mode is selected.
a. Select [Create NetWare Queue] from the [Setup] menu.
b. Click [Next].
c. Click [NDS mode] or [Bindery] depending on your network
environment.
NOTE
The TELNET application is not included as part of the
print server package. Install the TELNET package on to
your system. For further information, see your
Windows manual.
To Next Page
Loading...
Need help?
General
