OkiLAN 8200e Network User’s Guide
56
TCP/IP Tab (Environmental Setup)
8200e_AdminMgr_Environ_TCPIP_Tab.bmp
Item Comments
Use TCP/IP
Protocol
Enable/disable TCP/IP protocol. The default is
enabled. If disabled, the search will not be carried
out using TCP/IP.
Set Broadcast
Address
Set broadcast addresses that are used to search
OKI network interface cards using the TCP/IP
protocol.
Add Click [Add] to add the address to the list in the
box.
Delete Select an address in the box, then click [Delete]
to remove it.
To Next Page
Loading...
Need help?
General
