OkiLAN 8200e Network User’s Guide
88
Port-2
Set the EtherTalk printer object name, up to 32 alphanumeric
characters.
Default setting: the printer name on which the print server is
installed
AdminManager
[Setup]
→ [OKI Device Setup] → [EtherTalk] → [Printer
Name]
Web Browser
[Network]
→ [EtherTalk] → [EtherTalk Printer Name]
TELNET
[Setup printer port]
→ [EtherTalk port name]
Port-3
Set an appropriate command sequence to be sent to the connected printer
before printing a job. Combination of alphanumeric characters and the
following control characters, up to a maximum of 31 characters:
\b Backspace (0x08)
\t Tab (0x09)
\n Line feed (0x0a)
\v Vertical tab (0x0b)
\f Page feed (0x0c)
\r Carriage return (0x0d)
\xnn Hex code [nn] (0xnn)
\] Double quote (0x22)
\\ Back slash (0x5c).
AdminManager
Not applicable
Web Browser
Not applicable
TELNET
[Setup printer port]
→ [BOJ string]
To Next Page
Loading...
Need help?
General
