Do you have a question about the Oki C9650 and is the answer not in the manual?
Indicates potential equipment malfunction or damage if the caution is ignored.
General advice to carefully read and understand safety warnings before operating the printer.
Safety instructions concerning batteries, memory installation, toner powder handling, and toner cartridge disposal.
Overview of the printer's control panel and its adjustability for ease of use.
Explanation of the control panel buttons, status lights, and their functions.
Categories of messages displayed on the printer's control panel and their meanings.
Explanation of different printer status states like Information, Warning, and Error.
Describes the different types of menus: User, Administrator, and System Maintenance.
How to access and interpret printer configuration details and internal firmware versions.
General guidance on navigating and operating the printer's menu system for settings and information.
Procedures for safely turning the printer on and off.
Steps to correctly power down the printer, depending on hard disk drive installation.
Steps to correctly power up the printer, including notes for hard disk drive installations.
Information on printer consumables and routine maintenance procedures, including item lifespans.
How to check the remaining life of consumables and maintenance items via the menu system.
How the printer signals when consumables or maintenance items require replacement.
General advice on following installation details for replacing consumables and maintenance items.
Instructions for cleaning the printer's LED heads using a cleaner or soft cloth for optimal print quality.
Procedure for cleaning paper feed rollers to resolve frequent paper jams.
Section providing guidance for resolving common printer problems and errors.
Basic troubleshooting steps for initial printer issues, checking connections, and contacting support.
Overview of dealing with paper jams, including identifying causes and clearing procedures.
Steps to clear a paper jam accessed via the side cover of the printer.
Procedures for clearing staple jams in the finisher accessory.
A comprehensive list and explanation of messages displayed on the printer's control panel.
An overview of the printer's menu system, including top-level functions and navigation.