- 174 -
Matching Colors Using Utilities
4
3
5
1
2
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Registering ICC proîš¿les
You can match the colors using the printer ICC
proîš¿les. ICC proîš¿les are used for overall color
management. To use this function, it is necessary
to register the ICC proîš¿les for the input devices
(monitors, scanners, digital cameras, etc.) in the
printer beforehand.
Note
z
If there are no proîš¿les in the input or output devices,
consult the device manufacturer or your dealer.
îš„
Windows
Use the Conîš¿guration Tool. For the
procedure details, see "Storage Manager
plug-in" (P.184).
îš„
Mac OS X
Note
z
The proîš¿le assistant is not enclosed on the "Software
DVD-ROM", so download it from the OKI Data homepage.
1
Start the proîš¿le assistant.
2
Select the [Networks] or [USB] tab.
If the device is connected using USB, select
[USB]. If the device is connected using a
network, select [Networks].
3
Select the device to be registered, and
click [Select].
Note
z
Not compatible with USB2.0. If using this utility
with USB, set the device USB baud rate to 12Mbps
to connect using USB1.1.
4
Click [Add] in the main window.
5
Select the proîš¿le to be registered, and
click [Select].
Memo
z
ICC proîš¿les are normally stored in the [Library]>
[ColorSync]>[Proîš¿les] folder.
If you cannot îš¿nd the ICC proîš¿les, consult your
device manufacturer.
6
Select the proîš¿le type.
7
Select the number of the proîš¿le to be
registered.
The registered numbers are underlined in
bold. If a registered number is selected, the
proîš¿le will be overwritten.
8
If necessary, enter a comment in the
[Comments] îš¿eld.
The comments are displayed in the proîš¿le
tables and the color proîš¿le list reports.
9
Click [Add].
10
Check that the registered proîš¿les are
displayed in the main window list, and
select [File] and then [Close].
Memo
z
Registered proîš¿les can be used in color matching for the
[Graphic Pro] functions.
z
Steps 2 and 3 are omitted when the proîš¿le assistant
utility is started subsequently, and the utility is connected
to the device that was last used. To change the connected
printer, select [Printer selection] in Step 4.
Reference
z
For how to print the color proîš¿le list, see "Color proîš¿le
list" (P.271).
To Next Page
Loading...
Need help?
General
