Oki ES9431dn User Manual

- 221 -
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Network setting items

Security
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
NetBIOS over
TCP
- - Enable Species whether to use NetBIOS over TCP.
EtherTalk - - Disable Species whether to use EtherTalk.
Web (port No.:
80)
Device setup
(web) -
Enabled
Web setup Enable Species whether to access the device using web
pages.
Web - - 80 Species the port number to access the device
web page.
IPP (port No.:
631)
- - Disable Species whether to use IPP.
Telnet - - Disable Species whether to access the device using
Telnet.
FTP - - Disable Species whether to access the device using FTP.
SNMP - - Enable Species whether to access the device using
SNMP.
POP - - Disable Species whether to use POP3.
POP - - 110 Species the port number of POP3.
SNTP - - Disable Species whether to use SNTP.
Local Ports - - Enable Species whether to use specic protocols.
SMTP sending - - 25 Species the SMTP send port number.
Network
functions
Change
password
Change
password
Change
password
(Last 6 digits
of MAC
address)
Sets a new administrator password using 15
single-byte characters max. The password
is case-sensitive. This password is used only
when changing the setup from the utilities. The
administrator password set using the device
cannot be changed from this item.

IP ltering
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
IP ltering - - Disable Species whether to use IP ltering. Make
sure to make the following category settings if
enabling IP ltering. Unless these settings are
made, the device cannot be accessed via TCP/IP.
Start address
1 to 10
- - 0.0.0.0 Species the IP address authorized by access to
the device. You can specify individual addresses
or the address range.
End address
1 to 10
- - 0.0.0.0
Print 1 to 10 - - Disable Species whether to authorize print jobs from
the specied IP address.
Setup 1 to 10 - - Disable Species whether to authorize setup changes
from the specied IP address.
IP address of
the registered
administrator
- - 0.0.0.0
Automatically species the administrator IP address.
Normally only this address can access the device.
All accesses are authorized via proxy servers if the
administrator accesses the server via a proxy server.

Oki ES9431dn Specifications

General

Brand	Oki
Model	ES9431dn
Category	Printer
Language	English