Oki LD620D - 7 Appendix; Specifications; Label Types

- 25 -
LD620D
7. Appendix
7-1 Specifications
Item
Description
Printer
Printing Method
Direct Thermal Printing
Dot Density
203 dpi (8 dot/mm)
Printing Width
Max. 104 mm(Max. 4.09”)
Printing Speed
Max. 127 mm/sec(Max. 5ips)
Paper
Roll Width
42 ~ 106mm(1.65 ~ 4.17”)
AC
Adapter
SMPS Input Voltage
AC 100~240V
Frequency
50/60 Hz
SMPS Output Voltage
DC24V±5%
SMPS Output Current
2.5A
Usage
Conditions
Temperature
0 ~ 40 ℃ (Operating)
-20 ~ 60 ℃ (Storage)
Humidity
(except for paper)
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
※ Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is for indoor use and all the communication wirings are limited to inside
of the building.
- The switch is the disconnecting device. Turn off switch from any hazard.
7-2 Label Types
The label types used with this printer are as follows.
• Control Labels: PP
• Other Labels: PET