MB260
- 13 -
2 - Installation
Command panel
Accessing terminal menus
All terminal functions and settings are available via the menu and are associated to a specific menu command.
For example, the menu command 51 launches the printing of the functions list (the functions list stores the list of all
terminal menus, sub-menus and their identification number).
Two methods are available to access menu items: the step by step method or the shortcut method.
To print the functions list with the Step by step method:
1 Press .
2 Use the or button to browse the menu and select 5 - P
RINT. Confirm with OK.
3 Use the or button to browse the menu P
RINT and select 51-FUNCTIONS LIST. Confirm with OK.
To print the functions list with the shortcut method:
1 Press .
2 Enter 51 with the numerical keypad to directly print the functions list.
1. Screen.
2. Digital keypad.
3. Key : document analysis to the PC or a media
(USB key).
4. Key : local copy.
5. Key : stops the current PC print job.
6. Key : Validation.
7. Key
OK
: confirms the displayed selection.
8. Key
: menu access and navigation down the menus.
9. Key
C
: back to the previous menu and input correction.
10. Key
: navigation up the menus.
11. Key : stops the current operation.
12. Key : sets up the activation delay and toner save in
copy mode.
13. Key : access to print menu (print functions list,
machine settings, etc.).
14. Key : analysis resolution setup.
15. Key : contrast setup.
16. Icon : resolution "
Quality Text
".
17. Icon : resolution "
Photo
".
18. Icon : resolution "
Text
".
19. Icon : colour mode.
To Next Page
Loading...
