MB260
- 14 -
2 - Installation
Packaging contents
The packaging contains the items listed below:
Multifunction device
1 toner cartridge
1 Installation guide
1 PC installation CD ROM and 1 OCR PC software CD
ROM (depending on model)
2 booklets (safety and warranty)
1 power cord
Device installation
1 Unpack the device.
2 Install the device respecting the security notices
stated at the beginning of this booklet.
3 Remove all stickers from the machine.
4 Remove the plastic protection film from the screen.
Feed cassette paper insertion
Your device accepts a number of formats and types of
papers (refer to the paragraph Specifications, page 47).
1 Remove the paper feed cassette completely.
2 Push the lower panel down until it clicks.
Important
Before inserting paper, refer to the
paragraph Paper
recommendations, page 10.
Important
You can use paper weighing
between 60 and 105 g/m2.
To Next Page
Loading...
