Oki MB470 - User Manual

Other manuals for Oki MB470

Questions and Answers

D
David WoodAug 7, 2025
Why is my Oki MB470 printing light?
- C
  Carol ParkerAug 7, 2025
  If your Oki All in One Printer is printing light, several factors could be the cause: * The toner cartridge might not be properly seated—reinstall it. * The toner may be low—open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the issue continues, replace the toner cartridge. * The paper might be moist, or not suitable for the printer. Use paper stored in proper temperature and humidity conditions, or use recommended paper. * The paper settings may be incorrect. Set a proper value for Media Weight and Media Type in the Paper Setup menu, or set one value thicker for Media Weight. Also, if you're using recycled paper, set one value thicker for Media Weight in the Paper Setup menu.
L
Lauren KingAug 11, 2025
What to do if my Oki MB470 has vertical white lines on the printed page?
- W
  wanda09Aug 11, 2025
  If you're seeing vertical white lines on the printed pages from your Oki All in One Printer, it could be due to several reasons: * The LED head might be dirty. Wipe the LED head with a soft, lint-free cloth. * The toner could be low. Open the top cover and tap the cartridge a few times to evenly distribute any remaining toner. If the problem persists, replace the toner cartridge. * There might be foreign materials in the image drum. Replace the image drum cartridge. * The light-shielding film of the image drum cartridge might be dirty. Wipe the film with a soft, lint-free cloth.
D
Dominic MorrisAug 15, 2025
Why does my Oki MB470 All in One Printer have vertical lines?
- T
  Thomas LynchAug 15, 2025
  If your Oki All in One Printer is producing vertical lines, it could be due to: the image drum cartridge being damaged (replace the image drum cartridge), or the toner being low (open the top cover and tap the cartridge a few times to evenly distribute any remaining toner; if symptoms persist, replace the toner cartridge).
M
Melissa BradfordAug 19, 2025
What to do if documents received are light or have vertical streaks on Oki All in One Printer?
- D
  Danielle MillerAug 20, 2025
  If documents received are light or have vertical streaks on them using your Oki All in One Printer, lift the top cover and gently wipe the lens surface of the MFP’s LED array. Then check to see if the toner or image drum need replacing.
K
Kent JenkinsAug 25, 2025
Why does my Oki MB470 All in One Printer have a white area of paper lightly stained?
- M
  Michael WebsterAug 25, 2025
  If the white area of paper is lightly stained when using your Oki All in One Printer, it could be due to: paper containing static (use paper stored in proper temperature and humidity conditions), using too thick paper (use thinner paper), or the toner being low (open the top cover and tap the cartridge a few times to evenly distribute any remaining toner; if symptoms persist, replace the toner cartridge).
F
Fred GardnerAug 28, 2025
What to do if Oki MB470 is set for delayed transmission but it did not send?
- T
  Tyrone BoyerAug 29, 2025
  If your Oki All in One Printer is set for delayed transmission but it did not send, check the display to make sure that the MFP is set to the correct time and date.
L
Lori BrockSep 2, 2025
How to dial out on Oki MB470 All in One Printer connected to a PBX?
- A
  angelabrownSep 2, 2025
  To dial out on your Oki All in One Printer connected to a PBX, be certain that the dial prefix is entered before the telephone number for each number dialled or programmed into the machine. Additionally, the machine must be programmed for PBX operation before it will work with a PBX.

Oki MB470 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Paper Capacity	250 sheets
Maximum Paper Size	A4
Connectivity	USB, Ethernet
Operating System Compatibility	Windows, Mac OS
Maximum number of copies	99 copies
Modem speed	33.6 Kbps
Multi-Purpose tray capacity	100 sheets
ADF input capacity	50 sheets
Maximum input capacity	350 sheets
Standard output capacity	150 sheets
Internal memory	64 MB
Warm-up time	30 seconds
Print media types	Plain paper, Envelopes, Labels
Printer Type	All-in-One Printer