SETTING ITEMS (ADMIN)
- 265 -
8
Press [OK].
Importing the certificate begins.
Note
• Do not remove the USB storage device until the data
transfer is complete. Removing the device while data
are being transferred could destroy them or cause a
malfunction of the equipment.
9
When importing the certificate is complete,
press [OK].
You will be returned to the SECURITY screen.
10
Remove the USB storage device from the
USB port on the equipment.
Exporting the device certificate
Memo
• The file format of the exported device certificate will be PEM
(extension .crt).
1
On the SECURITY screen, press
[CERTIFICATE MANAGEMENT].
The CERTIFICATE MANAGEMENT screen is displayed.
2
Press [EXPORT].
A message appears prompting you to insert the USB
storage device.
3
Connect your USB storage device to the
USB port on the equipment, and press
[OK].
The EXPORT CERTIFICATE screen is displayed.
4
Press [DEVICE CERTIFICATE].
Exporting the certificate begins.
Note
• Do not remove the USB storage device until the data
transfer is complete. Removing the device while data
are being transferred could destroy them or cause a
malfunction of the equipment.
To Next Page
Loading...
Need help?
General
