Oki MB770 - Page 38

45372301TH Rev.2
4-12 /
Oki Data CONFIDENTIAL
4.2.8 Ejector encoder sensor (S8)
(1) Take off the Guide upper ASSY.
( P.4-3 "4.2.1 Guide upper ASSY")
(2) Remove 2 screws and 2 connectors [1],
remove the Stapler [2].
Fig. 4-24
(3) Remove 4 screws and 1 connector [3],
remove the Guide compile ASSY [4].
Fig. 4-25
Note:
Do not forget to install the belt [5].
Fig. 4-26
[2]
[1]
[3]
[4]
[5]