What to do if my Oki MC160N says 'MEMORY FULL'?
If the Oki All in One Printer displays 'MEMORY FULL' while sending or receiving a fax, it means the scanned image data size has exceeded the memory capacity. If MEMORY RX MODE is set to ON, cancel memory reception mode and print received documents stored in the memory. Alternatively, send the fax manually.
Why is transmission not possible on my Oki MC160N All in One Printer?
If your Oki All in One Printer is not transmitting faxes, ensure the transmission procedure is correct and try again. Verify the fax number, and check that programmed keys in the favorite list, speed dial, or group dial are correctly set. Also, check the telephone line connection. If the issue persists, the recipient's fax machine may have a problem, so contact them.
Why is the fax received blurry from my Oki All in One Printer?
If the fax received from your Oki All in One Printer is blurry, ensure the document is positioned correctly and that the original glass is clean. If the text is faint, adjust the resolution. Check the telephone line and try again. If the issue continues, the problem might be with the recipient's fax machine; make a copy to verify your machine is working correctly, and then have the recipient check their machine.
Why can't I receive faxes automatically on my Oki MC160N All in One Printer?
If faxes are not being received automatically on your Oki All in One Printer, check if the machine is set to manual reception and switch it to automatic. If the memory is full, load paper if empty, and print the faxes stored in memory. Also, verify the telephone line connection. If the problem persists, there may be an issue with the caller’s fax machine.
What to do if Oki MC160N All in One Printer shows 'LINE PROBLEM CHECK LINE'?
If the Oki All in One Printer displays 'LINE PROBLEM CHECK LINE', the telephone dialing or wiring system may not be set correctly. Check these settings and use the appropriate configuration menu to correct them. Also, ensure the telephone cable is correctly connected.
What does 'REDIAL ALL FAILED' mean on my Oki MC160N?
If your Oki All in One Printer displays 'REDIAL ALL FAILED', it means all redial attempts failed because the recipient’s line was busy or there was no answer. Check the recipient’s line and try sending the fax again.
Why does my Oki MC160N All in One Printer scan documents at an angle?
If your Oki All in One Printer is scanning documents at an angle, slide the document guides to fit the width of the document.
What does 'COMMUNICATION ERROR (####)' mean on my Oki MC160N All in One Printer?
If the Oki All in One Printer displays 'COMMUNICATION ERROR (####)', check the transmission results. Communication problems may arise from issues with the machine or the recipient/caller’s fax machine.
What does 'ADMINISTERED BY PC PLEASE WAIT!' mean on my Oki MC160N?
If the Oki All in One Printer displays 'ADMINISTERED BY PC PLEASE WAIT!', the machine is accessing the Setup Utility. Exit the Setup Utility, or wait 600 seconds for the main screen to reappear if no operation is performed.
Why is the received fax blank on my Oki MC160N All in One Printer?
If the received fax from your Oki All in One Printer is blank, check that the machine can make clean copies. If it can, have the caller send the fax again. The caller may have also loaded the pages backward.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Speed (Black) | 20 ppm |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed (Black) | 20 cpm |
| Fax Speed | 33.6 kbps |
| Copy resolution (black text) | 600 x 600 dpi |
| Maximum number of copies | 99 |
| Scanner type | Flatbed |
| Paper size | A4, A5, B5, Letter, Legal |
| Connectivity | USB, Ethernet |
| Display | LCD |
To Next Page
