- 36 -
Initial Setup for Faxing
3
Faxing (For MB362, MB562, ES5462 MFP only)
- The selected character is entered as “*” in
the text eld.
- If you have entered an incorrect value,
press the <CLEAR> key and then enter
the correct value.
b Repeat step a until all characters
required are entered.
c Press the and to select [Enter]
and press
OK
.
4 Press the to select [User Install] and
then press
OK
.
5 Press the to select [Super G3] and
then press
OK
.
6 Press the to select [OFF] and then
press
OK
.
7 Press the until the top screen is
dislpayed.
Step 3-6 Specifying Reception Mode
The optimal reception mode differs depending
on your machine’s environment. Check with the
following description.
● Fax Ready Mode
This mode is recommended when you use the
machine as a fax machine.
● Tel/Fax Ready Mode
This mode is recommended when you connect an
external phone to the machine.
● Ans/Fax Ready Mode
This mode is recommended when you connect an
external answering machine to the machine.
● Tel Ready Mode
This mode is recommended when you mainly use
an external phone connected to the machine.
● DRD
This mode is recommended when you use the
distinctive ring detection (DRD) function provided
by a telephone company.
1 Press the <SETTING> key on the
operator panel.
2 Press the to select [Admin Setup]
and press
OK
.
3 Enter the administrator password.
The factory default password is “aaaaaa”.
To Next Page
Loading...
Need help?
General
