Faxing - MC342dn, MC342dw, MC362dn, MC362w, MC562dn, MC562w, MC562dw, ES5462 MFP, ES5462dw MFP and MPS2731mc only
> 100
3. Using the Down arrow, scroll to Sub-Address and press the Right arrow key.
(a) Using the keypad enter the sub address.
(b) Highlight Done and press OK.
4. Using the Down arrow key, scroll to I.D.Code and press the Right arrow key:
(a) Register an ID Code number (4 digits) using the numeric keypad.
(b) Press OK.
5. If required, use the Down arrow key to scroll to Hold Time. Press the Right arrow
key:
(a) Enter the required hold time (00 ~ 31) using the numeric keypad.
(b) Press OK.
6. Press OK to complete.
NOTE
A sub address can be registered using up to 20 digits. Numbers, # and * can
be registered.
If you make a mistake when entering the digits, press the Clear button to
delete and then enter the correct digit.
NOTE
The ID code is not displayed, write it down and keep it safe!
NOTE
Specify a retention period between 0 and 31 days.
If “00” is specified, the data will be retained for an indefinite period.
Retention period input range is between 0 and 31 days). When 0 is set,
documents are retained for an indefinite period.
To Next Page
Loading...
Need help?
General
