Oki MC362dw User Manual

Appendix A - menu system > 183
ITEM OPTION DEFAULT VALUE/DESCRIPTION
Network
Menu
Network
Setup
Network
Setting
TCP/IP Enable Enables or disables
this network protocol.
IP Version IPv4 Set up the IP version.
Display condition:
TCP/IP protocol must
be enabled.
NetBEUI Disable Enables or disables
this network protocol.
NetBIOS Over TCP Enable Enables or disables
this network protocol.
Display condition:
TCP/IP protocol must
be enabled.
NetWare Disable Enables or disables
this network protocol.
EtherTalk Disable Enables or disables
this network protocol.
Frame Type Auto Selects the Ethernet
MAC layer frame type.
Display condition:
Netware must be
enabled.
IP Address Set Auto Specifies whether IP
address allocation is
automatic (DHCP) or
manually assigned.
Display condition:
TCP/IP protocol must
be enabled.
IPv4 Address xxx.xxx.xxx.
xxx
Current assigned IP
address.
To change, e n te r t he
address using the
numerical keypad.
Press Enter to
register new address.
Display condition:
TCP/IP protocol must
be enabled.
Subnet Mask xxx.xxx.xxx.
xxx
Current assigned
subnet mask. To
change, proceed as
above.
Display condition:
TCP/IP protocol must
be enabled.
Gateway Address xxx.xxx.xxx.
xxx
Current assigned
gateway address. To
change, proceed as
above.
Display condition:
TCP/IP protocol must
be enabled.
DNS Server (Primary) user defined The IP address of your
DNS server (primary).

Oki MC362dw Specifications

General

Brand	Oki
Model	MC362dw
Category	All in One Printer
Language	English