Getting started > 31
7. To use ActKey in Local PC mode (i.e. push scanning), it must be set as the program
to handle scanner events:
(a) Click [Start] to select [Control Panel].
(b) Enter [View scanners and cameras] in [Search Control Panel].
(c) Click the [View scanners and cameras] under [Devices and Printers].
(d) Select [OKI MC5(3)x2_ES5(3)4x2 USB] or [OKI MPS2731mc USB] and
click [Properties]. If the [User Account Control] dialog box appears, click
[Yes].
(e) Click the [Events] tab.
(f) Select an event for [Select an event].
(g) Select the [Start this program] check box and then select [ActKey].
(h) Repeat steps (f) and (g) so that [ActKey] is set to all events.
(i) Click [OK].
To Next Page
Loading...
Need help?
General
