7 / 11
GD-1340
8. Connect the connectors of [D] and [B] to
[A].
9. Attach the cover and tighten the screws.
•Screws:15places
10. Insert its latch (E) and then the parts
indicated by the arrows as shown in the
figure.
Perform this operation with care to avoid
injury. In addition, be sure not to damage
the cover.
11. Insert the latches (A) and (B) of the cover.
•A:2places
•B:2places
E
A
B
A
B
A
B
D
A
To Next Page
Loading...
