44871001TH Rev.6
4-13
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
(7) Open the scanner and remove the E-shaped retainer ring (RE4-SK) and
screw .
(8) Remove the E-shaped retainer ring (RE6-SK)
.
(9) Remove the shaft-stopper (hinge)
and remove the shaft-guide (hinge)
.
(10) Remove the scanner
.
⑭
⑮
⑯
⑰
⑱
⑲
Note! (to assemble)
1. The case of to assemble for the scanner unit to the Mainbody, insert the the
Shaft-Stopper (hinge)
to the hole with the marked 'N' on the Plate Assy Stay (R).
⑱
To Next Page
Loading...
