175 • Appendix A - Moving and transporting
4. Lift the image drum along with the toner cartridge out of the MFP and place it on
a flat table.
5. Place the drum and cartridge in a black bag plastic bag.
6. Re-install the image drum along with the toner cartridge back into the MFP.
7. Close the top cover and press down firmly so that the cover latches closed.
Caution!
The green image drum surface at the base of each cartridge is very
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes. Never expose the drum
to direct sunlight or very bright room lighting.
To Next Page
Loading...
