45372301TH Rev.2
3-6 /
Oki Data CONFIDENTIAL
[D] Finishing tray section
Fig. 3-5
While the paper passes the entrance transport sensor, the paper support motor (M6) drives the paper
support out the stacker tray side to wait for the paper being transported.
The paper support returns to the home position after the paper is discharged to the stacker tray.
The paper transported to the discharge section is aligned lengthwise by the main paddle and sub pad-
dle which are driven by the paddle motor (M3), and is aligned crosswise by the right alignment plate
and the left alignment plate, which are driven by the alignment motor (R) (M4) and the alignment motor
(L) (M5).
[1] Main paddle
[2] Sub paddle
[3] Paper support
[4] Right alignment plate
[5] Left alignment plate
[1]
[3]
[2] [4][5]
To Next Page
Loading...
