Why are my color documents copying in black and white on my Oki MC573 All in One Printer?
If color selection is set to [Auto], documents with extremely small colored parts, dark-colored documents, or pale documents may be copied in black and white. To resolve this, set the color selection to [Color]. You can change the criteria for determining color document and black and white document from [Auto Color Judge Level] in Scanner Setup.
What to do if the copied output size is different from the original document size on my Oki All in One Printer?
First, ensure that the proper size paper for the document is loaded in the paper tray. Also, check that the zoom rate is properly set and that [Repeat] is set to [OFF].
How to fix missing parts of the document image on the copied output from my Oki MC573?
Check if [Edge Erase], [Margin], or [N-in-1] is enabled. If any of these settings are set to [ON], set them to [OFF].
What to do if Oki All in One Printer displays error code '390'?
If your Oki All in One Printer displays error code '390', remove any documents from the ADF or document glass and any paper from the MP tray. Hold the handle (B) and fully open the scanner unit (a). Press the button (A|A) and fully open the output tray (b). Remove the four image drums and place them on a flat surface, covering them with paper. Open the transparent cover (c) inside the machine and gently remove any jammed paper. Put all four image drums back. Close the output tray (b) slowly, pushing the center for confirmation. When loading paper on the MP tray, ensure the print side is face up. Finally, hold the handle (B) to close the scanner unit (a).
What to do if Oki MC573 All in One Printer shows error code '391', '392', or '393'?
If your Oki All in One Printer displays error code '391', '392', or '393', pull out the cassette of the indicated tray and remove any jammed paper. Replace the paper cassette back into the machine. Hold the handle (B) and fully open the scanner unit (a). Press the button (A) and fully open the output tray (b). Close the output tray (b) slowly, pushing the center for confirmation. Finally, hold the handle (B) and close the scanner unit (a).
Why is my Oki All in One Printer unable to copy?
If your Oki All in One Printer is unable to copy, ensure the machine is turned on and initialization is complete. Check that the document is set properly and paper is loaded in the tray with the correct size for the document. Make sure the paper cassette is installed. On the touch panel, navigate to [Device Settings], then select [Paper Setup] > [Select Tray] > [Copy] > the paper tray where your paper is loaded, and choose [ON] or [ON(Prior)]. If you are trying duplex copying, ensure you are using appropriate paper and the settings are correct. If [Paper feed] is set to [Auto], set the media type for the paper tray to [Plain] or [Recycled]. Check for and clear any error messages or jammed paper. Replace empty toner cartridges, image drums, fuser units, or belt units if necessary. Ensure al...
What to do if Oki MC573 All in One Printer shows error code '370', '371', or '372'?
If your Oki All in One Printer displays error code '370', '371', or '372', press button (A|A) and fully open the output tray (b). Remove the four image drums and place them on a flat surface, covering them with paper to protect them from light. Remove any jammed paper slowly. If paper is jammed in the fuser unit, press the jam release lever (c) and gently pull the paper towards you. Tilt back the lock levers (d) on both sides of the fuser unit, hold the handle and lift the fuser unit out of the machine. Turn the lock levers (e) on both sides of the belt unit and remove it. Then, hold the lock levers to place the belt unit back into the machine and turn the lock levers (e) forward. Hold the fuser unit handle and place it back, tilting the lock levers (c) on both sides. Close the output tray...
What to do if Oki All in One Printer shows error code '380', '381', '382', '385', or '389'?
If your Oki All in One Printer shows error code '380', '381', '382', '385', or '389', begin by pressing button (A|A) and fully opening the output tray (b). Remove all four image drums and place them on a flat surface, covering them to prevent light exposure. Remove any jammed paper slowly. If paper is stuck in the fuser unit, press the jam release lever (c) and gently pull the paper toward you. Tilt back the lock levers (d) on both sides of the fuser unit. Hold the fuser unit handle and lift the unit out of the machine. Check inside the machine for any remaining pieces of paper. Then, hold the fuser unit handle and place it back into the machine, tilting the lock levers (d) on both sides. Put all four image drums back into the machine. Close the output tray (b) slowly, pushing the center f...
General warnings and cautions for safe operation of the machine.
Specifies environmental conditions for machine installation.
Step-by-step guide for unpacking and initial machine setup.
Guide for setting up and connecting the machine wirelessly.
Instructions for installing necessary drivers on PCs.
Explains the functions of the control panel buttons and display.
Basic steps to perform copying operations.
Instructions for sending scanned files via email.
Steps to resolve paper jam errors.
How to clear jams when documents are in the ADF.
Solutions for issues encountered during copying.
Solutions for issues encountered during printing.
Solutions for issues encountered during scanning.
Solutions for issues encountered during faxing.
General| Print Technology | LED |
|---|---|
| Print Speed (Black) | 30 ppm |
| Print Speed (Color) | 30 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed (Black) | 30 cpm |
| Copy Speed (Color) | 30 cpm |
| Duplex Printing | Yes |
| Paper Capacity | 250 sheets |
| Automatic Document Feeder (ADF) | 50 sheets |
| Functions | Print, copy, scan, fax |
| Fax Speed | 33.6 kbps |
| Scanner Type | Flatbed, ADF |
| Weight | 29 kg |
| Connectivity | USB, Ethernet |
| Mobile Printing | Apple AirPrint, Google Cloud Print |
| Operating System Compatibility | Windows, Mac |
| Monthly Duty Cycle | Up to 60, 000 pages |
| Display | 7" color LCD touch screen |
To Next Page
