Oki MC573 - Changing the Administrator Password

- 214 -
10. Operating Management/Specifications
Changing the Administrator Password
It is recommended to change the administrator password to protect your security. Set the
administrator password using from 6 to 12 alphanumeric characters. Be careful not to forget
the set password.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press or several times and press [Manage Unit].
5
Press or several times and press [Admin Password].
6
Enter a new password, and then press [OK].
7
Enter the password again.
8
Press [OK].