- 152 -
7. Fax
The factory default value is 1 Ring.
Change the value if faxes cannot be received.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Select [Fax Setup].
5
Select [Other Settings].
6
Press [Ring Response].
7
Select a waiting time.
8
Press [Back] until the home screen is displayed.
Setting the Waiting Time from When an Incoming Call Arrives
to When Reception Starts (Response Waiting Time)
To Next Page
Loading...
Need help?
General
