Oki MC560n - User Manual

Other manuals for Oki MC560n

Brochure4 pages

Specifications4 pages

Questions and Answers

A
Ashley WhiteAug 18, 2025
What to do if Oki All in One Printer display shows a communications error?
- J
  Jason KingAug 18, 2025
  If your Oki All in One Printer displays a communications error, it could be due to several reasons. The printer might be incompatible with the remote machine, or the remote machine may not be able to perform the requested function. Bad telephone line conditions can also cause this issue. Try sending the fax again, making sure you've dialed the correct number. If you need to dial a prefix for an outside line or are calling an international number, use the Pause key to insert a pause after the prefix or dialing code. If problems persist with a specific machine, program the number into a speed dial key and adjust its parameters. As a final check, try sending a fax to another location to verify if the issue lies with your local machine.
J
James GonzalezAug 20, 2025
Why Oki MC560n will not answer the telephone or receive faxes?
- E
  Elizabeth SmithAug 20, 2025
  If your Oki All in One Printer isn't answering the phone or receiving faxes, start by ensuring the power cord is properly connected. Then, check the reception mode setting on the machine. If manual receive mode is enabled, the printer won't automatically receive faxes.
E
Elaine ArnoldAug 23, 2025
How to improve image quality when faxing with Oki MC560n?
- D
  David SmithAug 23, 2025
  If you can fax with your Oki All in One Printer, but the image quality on the receiving end is poor, try adjusting the fax quality and density settings. Copy the document on your machine to see how it will transmit. Telephone line interference could also be the culprit, so try sending the document again later.
K
Kathryn SchwartzAug 26, 2025
What to do if image of received fax is very poor on Oki MC560n?
- C
  Caroline ClarkAug 26, 2025
  If the image quality of received faxes is poor on your Oki All in One Printer, first, make a copy of a document on your local machine to ensure it's working correctly. If the problem persists, contact the sender and ask them to adjust their fax quality and density settings. Also, ask them to copy the document on their machine to ensure it's working correctly, and then resend the fax.
L
Laura SullivanAug 27, 2025
Why Oki MC560n All in One Printer prints documents with light or vertical streaks, even if toner is full?
- U
  ubrooksAug 27, 2025
  If documents received on your Oki All in One Printer are light or have vertical streaks, even though the toner isn't empty, gently wipe the lens surface of the printer's LED array. If the issue continues, remove the image drum, tap the toner cartridge, and gently swing it vertically several times. If this doesn't resolve the problem, the image drum unit may need replacement.
A
Anna HarrisAug 29, 2025
Why Oki MC560n sends blank faxes?
- J
  Jack RiceAug 29, 2025
  If you're sending faxes from your Oki All in One Printer, but the received message is completely blank, ensure that the document is loaded correctly. Place the text face up in the ADF or face down on the glass.
R
Ricardo DuranSep 1, 2025
What to check if Oki All in One Printer is set for delayed transmission but it did not send?
- S
  stephengonzalezSep 1, 2025
  If your Oki All in One Printer is set for delayed transmission but didn't send, check the display to ensure the printer is set to the correct time and date.
J
julie61Sep 3, 2025
Why do faxes received on Oki MC560n All in One Printer sometimes look distorted?
- D
  dfigueroaSep 3, 2025
  Faxes received on your Oki All in One Printer may appear distorted if the document is wider or longer than the paper in the tray. The printer automatically reduces the document to fit the paper. This issue could also be communication-related.
A
Andrew WhitakerSep 6, 2025
How to stop Oki All in One Printer from answering before external telephone?
- W
  william96Sep 6, 2025
  If your Oki All in One Printer answers before you can use the external telephone, and an external telephone is connected, adjust the printer’s ring response setting.
N
Nicole Camacho PhDSep 8, 2025
What to do if dialing with a speed dial number on Oki MC560n does not work?
- N
  nancyhowardSep 8, 2025
  If dialing with a speed dial number on your Oki All in One Printer results in nothing happening, ensure the speed dial number is programmed correctly.

Oki MC560n Specifications

Printer Specifications

print speed (color)	Up to 20 ppm
print speed (black & white)	32 ppm
time to first page (color)	As fast as 11 seconds
time to first page (black & white)	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Copier Specifications

copy speed (color)	Up to 20 cpm
copy speed (black & white)	32 cpm
first copy out (color)	As fast as 23 seconds
first copy out (black & white)	19 seconds
copy resolution	Up to 600 x 600 dpi

Scanner Specifications

scan speed (color)	Up to 10 cpm
scan speed (black & white)	20 cpm
scan resolution	Up to 4800 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	3 seconds/page
fax resolution	Up to 200 x 400 dpi

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Paper Handling

scanner ADF capacity	Up to 50 sheets
paper sizes (main tray)	from 4.1" x 5.8" to 8.5" x 14"
standard printer input	400 sheets
maximum printer input	930 sheets
output capacity	250 sheets face down, 100 sheets face up

Environmental