To Next Page

To Previous Page

Installing upgrades > 143

10. When the MFP is ready, print a menu map as follows:

Control menu_oda.jpg

(a) Press Menu (1) on the scanner control panel.

(b) Using the UP/DOWN arrow keys (2), navigate to

the Report Print menu and press OK (3) once for the

menu map.

(d) When the menu map is printed, press Return (4) to

exit the menu system.

11. Examine the first page of the menu map.

Near the top of the page, between the two horizontal lines,

you will see the current MFP configuration. This list

contains the figure for total memory size.

This should indicate the total memory now installed, which

should be the size of memory board you have installed plus

256MB.

ARD

DISK

DRIVE

The optional 40GB internal hard disk drive (HDD) enables

collating of printed pages and can be used to store overlays and

macros, fonts, and secure or proof documents waiting to be

printed.

1. Switch the MFP off and disconnect the AC power cable.

Other manuals for Oki MC560n

Questions and Answers:

Need help?

Do you have a question about the Oki MC560n and is the answer not in the manual?

Printer Specifications

print speed (color)	Up to 20 ppm
print speed (black & white)	32 ppm
time to first page (color)	As fast as 11 seconds
time to first page (black & white)	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Copier Specifications

Scanner Specifications

Fax Specifications

System Memory

Paper Handling

scanner ADF capacity	Up to 50 sheets
paper sizes (main tray)	from 4.1" x 5.8" to 8.5" x 14"
standard printer input	400 sheets
maximum printer input	930 sheets
output capacity	250 sheets face down, 100 sheets face up

Environmental