To Next Page

To Previous Page

Installing upgrades > 146

Near the top of the page, between the two horizontal lines,

you will see the current MFP configuration. This should now

indicate that the hard disk unit is installed.

All that remains is to configure the Windows printer driver so that

it knows the hard disk unit has been fitted, and the additional

features can be made available immediately. See “Adjusting

windows printer drivers” on page 147.

DDITIONAL

PAPER

TRAY

1. Switch the MFP off and disconnect the AC power cable.

2. Place additional paper tray on desired location.

3. Observing safety rules for lifting and, using locating

guides, place MFP on top of the additional paper tray.

2nd tray & lock installation.eps

4. Locate securing clip, press down and lock into position.

5. Re-connect the AC power cable and switch the MFP ON.

NOTE

If you need to transport this product, make sure you unlock

the securing clip and remove the additional paper tray

beforehand.

Other manuals for Oki MC560n

Questions and Answers:

Need help?

Do you have a question about the Oki MC560n and is the answer not in the manual?

Printer Specifications

print speed (color)	Up to 20 ppm
print speed (black & white)	32 ppm
time to first page (color)	As fast as 11 seconds
time to first page (black & white)	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Copier Specifications

Scanner Specifications

Fax Specifications

System Memory

Paper Handling

scanner ADF capacity	Up to 50 sheets
paper sizes (main tray)	from 4.1" x 5.8" to 8.5" x 14"
standard printer input	400 sheets
maximum printer input	930 sheets
output capacity	250 sheets face down, 100 sheets face up

Environmental