Operation > 92
Increasing copy count
The machine is preset to a copy count of 1. If you wish to increase
the number of copies, select the number of copies with the
numeric keypad.
To increase the copy count:
1. Press the Copy Mode button on the control panel to
prompt the Copy screen.
2. Enter number of copies required with the numeric keypad.
The LCD display will confirm the copy count selected.
F
AXING
B
ASIC
OPERATION
Sending a fax to a single location
Control menu faxbasic_oda.jpg
1. Place your document(s) with text face UP in the ADF or
face DOWN on the glass.
2. Press the Fax Mode button (1) on the control panel to
prompt the Fax screen.
3. Enter the destination fax number by either:
> typing in the number using the numeric keypad (4)
> pressing the required speed dial button (5))
NOTE
If the destination fax number has an “extension number”,
press the Pause button (6) to input a “-” between numbers.
The machine will insert a 1 second pause when dialling.
To Next Page
Loading...
