Oki MC560n User Manual

Installing upgrades > 147
S TORAGE CABINET
Refer to manufacturers instructions.
A DJUSTING WINDOWS PRINTER DRIVERS
Once your new upgrade has been installed, you may need to
update the Windows printer driver so that the additional features
are available to your Windows applications.
Remember that if your MFP is shared between users on different
computers, the driver must be adjusted on each user’s machine.
The illustrations shown here are for Windows XP. Other Windows
versions may appear slightly different, but the principles are the
same.
PCL DRIVER
If you have installed a memory upgrade it is not necessary to
change the PCL printer driver, and you can ignore this section.
If you have installed a duplex unit or hard disk, proceed as
follows:
PCL DevOption (288).bmp
1. Open the Printers window
(called “Printers and Faxes” in
Windows XP) via the Start Menu
or from the Windows Control
Panel.
2. Right-click the printer icon for
this printer, and choose
Properties from the pop-up
menu.
3. On the Device Options tab,
check the box for the upgrade
you have just installed.
4. Click OK to close the properties window, and then close
the Printers window.

Oki MC560n Specifications

Printer Specifications

print speed (color)	Up to 20 ppm
print speed (black & white)	32 ppm
time to first page (color)	As fast as 11 seconds
time to first page (black & white)	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Copier Specifications

copy speed (color)	Up to 20 cpm
copy speed (black & white)	32 cpm
first copy out (color)	As fast as 23 seconds
first copy out (black & white)	19 seconds
copy resolution	Up to 600 x 600 dpi

Scanner Specifications

scan speed (color)	Up to 10 cpm
scan speed (black & white)	20 cpm
scan resolution	Up to 4800 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	3 seconds/page
fax resolution	Up to 200 x 400 dpi

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Paper Handling

scanner ADF capacity	Up to 50 sheets
paper sizes (main tray)	from 4.1" x 5.8" to 8.5" x 14"
standard printer input	400 sheets
maximum printer input	930 sheets
output capacity	250 sheets face down, 100 sheets face up

Environmental

dimensions (WxDxH)	19.7" x 23.6" x 26.7"
weight	81.6 lb.
power consumption (peak)	1200W
power consumption (standby)	110W
power consumption (normal)	490W