Oki MC560n User Manual

A guide to printing > 210
disabled, the gray components may be printed using a
mixture of CMYK toner, instead of just K (black) toner.
4. Select a Printer Output Profile (4).
If [Auto] is selected, the factory default profiles that are
embedded in the MFP will be used. If you have created a
profile yourself using profile creation software, select it
here.
If you have selected a profile other than [Auto], select the
[Rendering Intent] (5). (See “Rendering intents” on
page 210.)
R ENDERING INTENTS
When selecting the Printer Output Profile, if you select any other
profile apart from [Auto], you can select the Rendering Intent.
The rendering intents are essentially a set of rules that determine
how colors that fall outside of the printable colors are treated.
Select the rendering intent that best suits the document you are
printing.
P ERCEPTUAL
This option is recommended for printing photographs.
Typically, perceptual rendering desaturates all the colors when
printing. This brings unprintable colors into the printer’s range,
while keeping the relationships between the colors the same.
S ATURATION
This option is recommended for printing business graphics if you
want vivid colors. This will not necessarily produce accurate
color, as the emphasis is on maintaining saturation.
R ELATIVE COLORIMETRIC
This option is best for printing solid colors and tints. Use Relative
Colorimetric when printing from a drawing program such as
Adobe Illustrator, or Macromedia Freehand.
A BSOLUTE COLORIMETRIC
This option is recommended if you are proofing images on your
MFP that are intended for final output on a printing press. This
may result in a visible color cast on your print as it will also try to
simulate the paper white of the target device.

Oki MC560n Specifications

Printer Specifications

print speed (color)	Up to 20 ppm
print speed (black & white)	32 ppm
time to first page (color)	As fast as 11 seconds
time to first page (black & white)	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Copier Specifications

copy speed (color)	Up to 20 cpm
copy speed (black & white)	32 cpm
first copy out (color)	As fast as 23 seconds
first copy out (black & white)	19 seconds
copy resolution	Up to 600 x 600 dpi

Scanner Specifications

scan speed (color)	Up to 10 cpm
scan speed (black & white)	20 cpm
scan resolution	Up to 4800 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	3 seconds/page
fax resolution	Up to 200 x 400 dpi

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Paper Handling

scanner ADF capacity	Up to 50 sheets
paper sizes (main tray)	from 4.1" x 5.8" to 8.5" x 14"
standard printer input	400 sheets
maximum printer input	930 sheets
output capacity	250 sheets face down, 100 sheets face up

Environmental

dimensions (WxDxH)	19.7" x 23.6" x 26.7"
weight	81.6 lb.
power consumption (peak)	1200W
power consumption (standby)	110W
power consumption (normal)	490W