45372301TH Rev.2
5-1 /
Oki Data CONFIDENTIAL
5. ADJUSTMENT
5.1 Stapling Position Misalignment
If any stapling position is misaligned, perform adjustment following the procedure below.
(1) Remove the Guide upper ASSY.
P.4-3 "4.2.1 Guide upper ASSY"
(2) Shift both the side fences: Tamper: Right [1]
and Tamper: Left [2] from the side plate to
the inside by 20 mm.
Fig. 5-1
(3) Place a sheet of thick paper on the tray com-
pile and adjust both side fences so as to
become parallel.
Fig. 5-2
20 mm
20 mm
[2]
[1]
To Next Page
Loading...
