45372301TH Rev.2
6-3 /
Oki Data CONFIDENTIAL
[EA2B] Paper transport jam (Exit transport sensor)
[EA31] Power-ON jam
Classification Error content
Paper jam in finisher section
Paper stayed for longer than set period at exit transport sensor while
being transported in finisher transport path.
Check item Measures
Transport path If there is paper in the paper transport path, remove the paper.
Exit transport sensor
• Sensor check (S2)
• Connector check (P8-1)
• Harness check
Finisher control PC board
• Board check
• Connector check (J7, J8)
• Harness check
Parts to be replaced Remark
Exit transport sensor
Finisher control PC board
Classification Error content
Paper jam in finisher section
Paper was detected at either the entrance transport sensor or the exit
transport sensor when the power was on or the finisher's rear cover was
closed.
Check item Measures
Transport path If there is paper in the paper transport path, remove the paper.
Entrance transport sensor
• Sensor check (S1)
• Connector check (P7-2)
• Harness check
Exit transport sensor
• Sensor check (S2)
• Connector check (P8-1)
• Harness check
Finisher control PC board
• Board check
• Connector check (J7, J8)
• Harness check
Parts to be replaced Remark
Entrance transport sensor
Exit transport sensor
Finisher control PC board
To Next Page
Loading...
