15 Configuration: Ad Hoc Mode
9. Click [Wireless LAN] on the left side of the screen.
10. Make your selections:
• Network Type = Ad Hoc
• Communication Mode = AUTO or 802.11b
• Channel = 1 through 13 (to ensure speed and accuracy
when using wireless access points which are near each
other, be sure to leave 5 blank channels between
assigned channels; e.g., select channels 1 / 6 / 11)
• SSID = (name you select)
• Authentication = Open or Shared Key (WEP)
11. Click [Submit].
To Next Page
Loading...
