16 Configuration: Ad Hoc Mode
Configuration Using AdminManager
1. Launch AdminManager:
• From your computer: [Start] → [Programs] → [OKI
Setup Utility]
→ [Admin Manager]
• From CD, after AutoRun: [(Language]) → [Next] →
[Custom Install] →
[Network
Software]
→ [Installation/Config] → [Admin Mgr /
Quick Setup]
→ [(language)] → [OKI Device Standard
Setup]
→ [Execute from CD-ROM] → [Next].
2. Wait for the software to discover the printer (if automatic
discovery fails, click [File
] → [Search]).
The printer appears as MLETB13 or OkiLAN8200e.
3. Click the discovered printer, then select [Oki Device Setup]
from the Setup menu.
4. Select [Guest User], click [OK].
NOTE
If you are using AdminManager to configure the wireless
card, and you have not installed the utility on your
computer, you will need the CD supplied with your printer to
launch the utility.
To Next Page
Loading...
