Oki PT330 - Connecting the AC Adapter and Cable

Copyright (C) 2012 Oki Data Corporation
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
15 of 33
3.3.3 Network Software
Use the following procedure to install or run the network software.
Click “Run Quick Setup”, “Install
Admin Manager” or “Install PR-Port
Manager”.
If the screen on the left appears
during the installation, follow the
instructions in the wizard to install
Printer Utility or Status Monitor.
* For more information about how to
install and use “Network Software”
see the LAN Card Online Manual.
* When u
sing port made by “PR-PortManager”, please clear the “Enable bidirectional support” check box in the
printer properties for the Windows driver.