Oki PT330 - 3 Installation; How to Use this Manual

Copyright (C) 2012 Oki Data Corporation
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
5 of 33
3 Installation
3.1 How to use this manual
The procedures for performing the operations listed below are different depending on your OS. Please
refer to the instructions for the OS you are using.
Printer folder
OS Procedure
Windows 7
(1) Click the
Windows logo button in the lower-left corner of the
desktop screen.
(2) Click [Devices and Printers].
Server 2008 R2 Click [Start]  [Devices and Printers].
Windows Vista
(1) Click the
Windows logo button in the lower-left corner of the
desktop screen.
(2) Click [Control Panel]  [Hardware and Sound]  [Printers].
Server 2008 Click [Start]  [Control Panel]  [Hardware and Sound]  [Printers].
Windows XP
/ Server 2003
/ WEPOS
/ WEPOS 2009
Click [Start]  [Printers and Faxes].
* For Windows XP Home Edition
Click [Start]  [Control Panel]  [Printers and Other Hardware].
Windows 2000 Click [Start]  [Settings]  [Printers].
Printer properties
OS Procedure
Windows 7
/ Server 2008 R2
Right-click the "PT330-331 Raster" printer and then click [Printer
Properties].
Windows Vista
/ Server 2008
Right-click the "PT330-331 Raster" printer and then click [Run as
administrator]  [Properties].
* If you logged on to Server 2008 using the built-in administrator
account, right-click the "PT330-331 Raster" printer and then click
[Properties].
Windows XP
/ Server 2003
/ WEPOS
/ WEPOS 2009
/ Windows 2000
Right-click the "PT330-331 Raster" printer and then click
[Properties].