Oki PT330 - OPOS Driver; Installation Confirmation

Copyright (C) 2012 Oki Data Corporation
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
20 of 33
4.2 OPOS driver
4.2.1 Installation confirmation
Use the following procedure to confirm that the OPOS driver installed successfully.
* If the [User Account Control] dialog box is displayed, click [Yes] or [Continue].
From All Programs (*), click [Okidata] 
[OPOS]  [Printer OPOS Setup].
* See the [All programs] procedure in
"3.1 How to use this manual" for
instructions on how to open the
screen in each OS.
The [OCX Setup] screen is displayed.
Select the interface you are using and
then click [OK].
Configure LAN port settings.
(1) Click [Printer Detection].
(2) Select the printer that appears.
(3) Click [Printer Setting] button.
(2)
(1)
(3)