Oki PT330 - Check Serial Number

Copyright (C) 2012 Oki Data Corporation
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1
22 of 33
4.2.2 Check serial number
Use the following procedure to check the serial number.
(1) Load paper in the printer and then close the cover.
(2) Turn the power on while holding down the FEED button. Keep holding it down until printing starts.
(3) Release the FEED button after the following printout is output.
Special Mode
1.Test Print
2.Setup Menu
3.Hex Dump
4.Command Trace
5.Sample Print
6.End
<Set>
Press FEED button for the number of times
as the same as your selecting item, and
wait more than 1 second.
Paper feed direction
PT330-331 Ver1.0
123456
Memory Switch 1
Power On Status Enable
Receive Buffer 4KByte
Busy Condition Bufferfull
Receive Error ?Print
Auto LF Disable
DSR(#6)Reset Disable
INIT(#25)Reset Disable
USB Soft Reset Enable
Memory Switch 2
Cover Open Error Auto Recovery
(4) Press the FEED button on
ce and then wait for a second for printing to start.
Serial number
(5) When printing finishes, turn the power off.